Download EtherWAN Managed Switch User Manual

Load Configuration from a TFTP Server
To Load a Configuration from a TFTP server, use the following CLI commands:
CLI Command Mode: Privileged Exec Mode
CLI Command Syntax:
install config-file <tftpserver_ipaddress> <filename>
Usage Example: Loading a Configuration
switch_a>enable
switch_a#install config-file 192.168.1.100 file_name.txt
switch_a#q
switch_a#
Save Configuration to a TFTP Server
To Save a Configuration to a TFTP server, use the following CLI commands:
CLI Command Mode: Privileged Exec Mode
CLI Command Syntax:
write confige-file <tftpserver_ipaddress> <filename>
Usage Example: Saving a Configuration
switch_a>enable
switch_a#write config-file 192.168.1.100 flash.tgz
switch_a#q
switch_a>
46
EtherWAN Managed Switch Users Guide