1
Download Concept 2.6 User Manual
Transcript
ASCII Message Editor Variables Introduction A variable will be given the format NTF. The meaning of this is: l N representing the decimal number (1...99) of the data fields of the data type defined by T. l T is the data type of the variable. l F the decimal field width for the variable. Data Types Example The data types supported are: Type Repetition factor A = ASCII character 1 B = binary number 1 to 16 H = hexadecimal 1 to 4 I = integer 1 to 8 L = integer with leading 0s 1 to 8 O = octal 1 to 6 For example: 2H2 means: l 2 registers (N) l in hexadecimal (T) l containing 2 hexadecimal numbers (F) N can fit into the number of data registers needed, but it is not an absolute requirement. The relationship is: 596 Type Relationship A Number of registers = N/2 (next upper integer value) B Number of registers = N H for 1 ≤ F ≤ 4... Number of registers = N for 5 ≤ F ≤ 8... Number of registers = 2 x N I and L The same as H O Number of registers = N 33002204
