Download Software Manual WinIQSIM
Transcript
3GPP W-CDMA TDD Mode 14.3.2.2 WinIQSIM Combination with Multi Carrier Mixed Signal The Multi Carrier Mixed Signal system offers the possibility of versatile extensions. Several waveforms (up to 32) can be added. For a detailed description please refer to section 10. First save the waveforms in any desired system under "File/Save for Add/Multi Carrier Mixed Signal". Then go to the Multi Carrier Mixed Signal system, where you can add the saved waveforms (IBN format, i.e. full floating-point notation). 14.3.2.2.1 Simulation of Multi Carrier Scenarios This is the main application of the Multi Carrier Mixed Signal. Ø Enter channel spacing of 5 MHz (or 0.2 MHz if you wish to combine 3GPP TDD with GSM). Ø Assign waveforms to the channels as desired. Example of mixed 3GPP TDD / GSM scenario: Fig. 14-36 Possible configuration of mixed 3GPP TDD / GSM scenario The following spectrum is obtained for the above scenario: Fig. 14-37 Spectrum of mixed 3GPP TDD / GSM scenario 1013.1642.02 14-28 E-2
Related documents
Software Manual WinIQSIM
user manual - Rohde & Schwarz
R&S®SMU200A Release Note Version 2.20
R&S®SMJ100A Release Note Version 2.20
SMIQB60 Arbitrary Waveform Generator for SMIQ
JWAI203/JWAI204 802.11 b/g/n AP Router User Manual
Creating Test Signals for Bluetooth with AMIQ
User`s Manual as a Requirements Specification
22Mbps Wireless LAN Access Point
view data sheet - Electro Rent Corporation
R&S®FSH User Manual
Atmel AVR2044: RCB128RFA1