Download Motion Coordinate System User Manual
Transcript
Appendix A Motion Coordinated Instructions (MCLM, MCCM, MCCD, MCS, MCSD, MCT, MCTP, MCSR, MDCC) Jerk Enumerations The following enumerations are defined for time driven and MDSC driven Jerk units. Table 71 - Jerk Enumeration Enumeration 0 1 2 3 4 5 6 7 Description Mode Compatibility Units per sec Time Existing Enumeration Existing Enumeration Existing Enumeration % Maximum % of Time Reserved Notes Reserved for Time based programming Units per MasterUnit Reserved % of Time-Master Driven Reserved MDSC New Enumeration New Enumeration Reserved for Time based programming Acceptable combinations of Accel and Decel Units are based on the programmed Speed Units in the instruction as is shown in the table below. This table is used to clarify the differences in the following four tables. Speed Units Accel Units vs Jerk Units Defined in Table: Units per Sec Table 72 Units per Master Units Table 73 Seconds Table 74 Master Units Table 75 The following table shows acceptable combinations of Acceleration Units and Jerk Units when Speed Units are Units per Sec. 252 Rockwell Automation Publication MOTION-UM002D-EN-P - February 2015