1
Download User Manual
Transcript
Gill Instruments Ltd _____________________________________________________________________________________________________________ Continue to insert all of the contacts you require. Once all of the contacts are inserted push the red retainer into place. NB. The retainer can only be pushed back into place if the contacts are fully engaged. Fit the connector to the MaxiMet so that you can finish assembling the connector. Screw the back shell onto the connector until it is fully in place. Please note that the final rotations can be slightly stiff. Now screw the next part of the connector into place. Now screw the cable-clamping nut into place. The connector can now be removed from the MaxiMet. NOTE: To disassemble the connector, reverse this procedure. ________________________________________________________________________________________________ MaxiMet Page 22 Issue 4 Doc. No. 1957-PS-001 August 2015
