Download ControlMatrix User`s Manual
Transcript
ControlMatrix User’s Guide – Advanced Topics Failure of any of these elements will cause the Cobber Link output to be suppressed, raising an alarm on the other host. The health of network interfaces is monitored by testing whether the host can see any of the devices that should be available on that interface. If all of the devices are offline, the host decides that network interface is non-functional. As a consequence, the host might be deemed to be unserviceable if, for example, MediaMatrix units are down, or the switch connected to the network interface is powered down. Care needs to be taken with the information to decide on the best course of action when a Cobber fault is detected. 12.6.3 Redundant MediaMatrix support In support of the redundant hardware concept, it is possible for two MediaMatrix units to be listed in the configuration. When this is done, the system automatically drives the two frames in similar fashion, ensuring the two frames are operating identically at all times. To support this feature, the view file in use must use the BuddyLink device to arbitrate on which MediaMatrix frame is active and to suppress CAB control and CobraNet activity from the inactive frame. See the MediaMatrix help system for help on this device. V4.0US, September 2004 Page 224