Download ControlMatrix User`s Manual

Transcript
ControlMatrix User’s Guide – Advanced Topics
Failure of any of these elements will cause the Cobber Link output to be suppressed, raising an alarm
on the other host.
The health of network interfaces is monitored by testing whether the host can see any of the devices
that should be available on that interface. If all of the devices are offline, the host decides that
network interface is non-functional. As a consequence, the host might be deemed to be
unserviceable if, for example, MediaMatrix units are down, or the switch connected to the network
interface is powered down. Care needs to be taken with the information to decide on the best course
of action when a Cobber fault is detected.
12.6.3 Redundant MediaMatrix support
In support of the redundant hardware concept, it is possible for two MediaMatrix units to be listed in
the configuration. When this is done, the system automatically drives the two frames in similar
fashion, ensuring the two frames are operating identically at all times. To support this feature, the
view file in use must use the BuddyLink device to arbitrate on which MediaMatrix frame is active
and to suppress CAB control and CobraNet activity from the inactive frame. See the MediaMatrix
help system for help on this device.
V4.0US, September 2004
Page 224