1
Download USER`S MANUAL
Transcript
CONVERGE SERIAL COMMANDS Command Function AA AARINGS ACONN AD AEC AECREF AGC BATTERYLVL BAUD CALLDUR CAMBAUD CAMCTRLMODE CAMFLOW CAMMOVE CAMPRESET CAMPRESETSET CAMPRESETSET2 CAMPOSITION CAMSWITCHLAG CAMTRACK CAMZOOM CHAIRO CLEAREFFECT CLOCK COUNTRY DECAY DEFAULT DEVICE DEVICETYPE Selects/reports setting of auto answer Selects/reports setting of the number of rings to auto answer Selects/reports status of audible connect/disconnect indication Selects/reports setting of auto disconnect Selects/reports acoustic echo canceller setting Enables/disables or reports current status of AEC reference Selects/reports AGC Reports battery level on remote Selects/reports the baud rate of the serial port Indicates how long a call has lasted Selects/reports baud rate of camera control port Sets/reports camera control port mode Selects/reports flow control of camera control port Sends command to move the camera on the camera control port Executes camera preset Sets current position of camera as preset Sets/reports current camera preset Sets/reports current position of camera on the camera control port Set the switch time lag for voice tracking Selects/reports camera voice-tracking mode Sets/reports current zoom of camera on the camera control port Selects/reports the setting of chairman override for a mic input Enables/disables or reports current status of clear effect Sets/reports current time Sets/reports country for compliance Selects/reports the setting of the decay rate for a mic input Sets the unit to default Selects/reports manufacturer identification label Enables /disables or reports the current type of device connected to an input or output Dials DTMF sequence or reports last sequence dialed Selects/reports device ID Selects/reports IP address of the Ethernet port Selects/reports use of DHCP of the Ethernet port Selects/reports DNS server IP address of the Ethernet port Selects/reports use of the DNS of the Ethernet port Selects/reports default gateway of the Ethernet port Selects/reports subnet mask of the Ethernet port Enables/disables or reports current status of equalization Enables/disables or reports current status of equalization Selects/reports the setting of filters for a mic input Turns on and off the filters for a mic Selects/reports the flow control of the serial port Changes/reports gain for a channel Reports gate status of microphones Selects/reports the setting of the hold time for a mic input Selects/reports the setting of the gating mode for a mic input Selects/reports the setting of the gate ratio for a mic input DIAL DID ENETADDR ENETDHCP ENETDNSA ENETDNS ENETGATE ENETSUBN EQ EQSEL FILTER FILTSEL FLOW GAIN GATE GHOLD GMODE GRATIO 86 Technical Services: 800.283.5936
