Download USER`S MANUAL
Transcript
TO MUTE/UNMUTE MICROPHONES 1. Press to mute the microphones. 2. Press again to unmute the microphones. > Note: This function mutes all microphones in the room.The mixer front panel LEDs light red when the microphones are muted. TO USE SPEED DIAL 1. Press and hold the assigned speed dial number on the dial pad. > Note: You can dial numbers 1-9 by pressing and holding the assigned number. To dial speed dial 10, press and hold 0. TO REDIAL A PHONE NUMBER 1. Press . > Note: REDIAL saves the last number that was dialed from the controller. Once REDIAL is pressed, the phone will be taken off-hook and the number will be dialed. TO DIAL A CALL FROM THE PHONEBOOK 1. Press on the controller. 2. Scroll to the entry and press > Note: The phonebook key will delete the entire dial string if you press it for two seconds. Pressing and holding the pound (#) key for two seconds will insert a pause into the dialing string. The duration of the pause is two seconds. . Conference Product Management Sales Team * Dialing from the phonebook TO USE THE STATUS KEY (RF CONTROLLER ONLY) 1. Press and hold for two seconds to display the status of the Converge. If the phone is not in use (on-hook) the LCD will display the device name, the date and time and the local number. ClearOne 55 10/13/04 14:33 PM 8013568518 On-hook status If the phone is in use (off-hook), the LCD will display the call duration, the date and time and the dialed number. 56 11:14 10/13/04 14:33 PM 9795311468 Off-hook status Technical Services: 800.283.5936