Download X80 Wireless Camera System Users Manual

5. Connecting to a Cell Base
Cell Base
9
Cell Base
10
Set connection default options.
These should be checked for normal use.
Enable or Disable Low Battery Detection.
If this box is checked, the cellular connection will
be turned off when the battery is low. This will
prevent battery damage. It will be automatically
turned back on if the battery charges back up to
a sufficient level (e.g. by solar charger).
It is recommended to check this box if the
Cell Base is powered with a battery.
Cell Base
11
Select the check connection and lost
connection times.
The connection to the Cell Base may be lost due
to a temporary Internet outage or a dropped cell
signal. X-Series Network Manager will periodically
check the connection and try to reconnect if it is lost.
Shorter time settings will result in less down time
but will use slightly more battery power.
Cell Base
Click the Connect button.
13
Cell Base
14
Cell Base
Click the Done button.
Close the enclosure lid.
15
X80 Wireless Camera User's Manual v2.0
11 of 35