Download X80 Wireless Camera System Users Manual

Transcript
6. Connecting to a Net Base
Net Base
9
Enter the Authentication Code from the Net Base
Information Sheet.
Keep the Net Base Information Sheet in a safe place. You may
need it again if you need to re-enter the connection setup or if you
need to contact Buckeye Cam tech support.
Net Base
10
Net Base
11
Net Base
12
Set the Check connection and lost connection times.
The default time of 1 minute is adequate for most applications.
Click the connect button.
Close the enclosure lid.
X80 Wireless Camera User's Manual v2.0
14 of 35