Download Installation and Configuration Guide

SigTEL EVC System
Installation and Configuration Guide
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
IMPORTANT ................................................................................................. 2
Emergency Voice Communication (EVC) Systems ................................... 3
SigTEL Components ................................................................................... 4
Cables .......................................................................................................... 6
Typical Systems .......................................................................................... 7
First Fix Installation ..................................................................................... 9
Mounting CCU-16 and SCU-16 Enclosures ............................................. 10
Mains Wiring .............................................................................................. 12
Fitting Outstations..................................................................................... 13
Second Fix Installation ............................................................................. 15
Testing Outstation Lines........................................................................... 18
Powering Up and Testing.......................................................................... 20
Optional Interfaces .................................................................................... 22
CCU-16 Error Codes .................................................................................. 23
ECU & CCU-16 Keypads............................................................................ 24
Automatic Configuration........................................................................... 26
Editing Outstation Names ......................................................................... 27
Component Specifications ....................................................................... 29
Identification of SigTEL EVC components .............................................. 31
Installation and Commissioning Certificate ............................................ 32
1. IMPORTANT
READ THIS SECTION BEFORE INSTALLING / MAINTAINING THIS PRODUCT
This equipment must only be installed and maintained by a suitably skilled and technically competent
person.
No responsibility can be accepted by the manufacturer or distributors of this product for any
misinterpretation of an instruction, or guidance note, or for the compliance of the system as a whole.
EVC system design is beyond the scope of this document. An understanding of system components and
their use is assumed.
About this guide
This guide explains how to install commission and maintain a SigTEL EVC disabled refuge and fire
telephone system. A separate Operator Instruction (ref. DCP0001928) includes detailed operational
information, some of which will need to be referred to by the installation engineer when setting up the
system.
No responsibility can be accepted by the manufacturers or distributors for any misinterpretation of these
instructions, or for the compliance of the system as a whole.
Note: This installation guide must not be accessible to the user.
System design
This document does not cover EVC system design. We recommend that you read BS 5839 Part 9
(available in libraries or from the BSI, www.bsonline.bsi-global.com) for this information.
Contact the building control or fire officer in case he has any special requirements.
SigTEL
Emergency Voice
Communication System
Approved Document No. DCP0001483 Rev 3
Page 2 of 32