Download Infinitely Expandable MPDP
Transcript
Infinitely Expandable OPM-4260 | OPM-4260R 4.4. Connection of Control Cable - In case of using the other control program besides MSCS ※ If you use the other screen control program besides MSCS, the signal cable must be connected via MFC (Multi- Function Controller) of ORION. ••Control signal transmission can be connected by 2 different methods. (RS-232C or Ethernet) •• RS-232C and Ethernet connection cannot be used simultaneously. 4.4.2. Connection of Ethernet Cable ••If you want to control MPDP sets with Ethernet, PC and MFC can be connected with Ethernet cable and between MFC and the first MPDP set and between the other MPDP sets should be connected with RS-232C cable. 4.4.1. Connection of RS-232C Cable ••The RS-232C signal cable must be connected via MFC. ••Maximum use of RS-232C with Daisy Chain connection is 30 sets or less, if you need additional connection, use RS-232C distributor. ID 1 RS-232C LAN RS-232C IN ID 2 RS-232C OUT IN ID 3 OUT OUT ID 5 RS-232C IN ID 6 OUT ID 4 RS-232C OUT IN OUT ID 5 IN ID 6 RS-232C LAN IN OUT IN IN ID 8 RS-232C RS-232C LAN OUT RS-232C LAN IN OUT IN RS-232C RS-232C IN OUT IN OUT IN OUT LAN Cable (Cross Cable) New MFC HUB or Router (Wireless & Cable) Ethernet control PC RS-232C New MFC RS-232C control PC - 26 - OUT ID 9 RS-232C OUT ID 9 RS-232C OUT RS-232C IN ID 8 RS-232C OUT LAN ID 7 OUT LAN ID 7 IN RS-232C RS-232C IN RS-232C ID 3 LAN IN LAN ID 4 RS-232C LAN IN ID 1 ID 2 LAN Cable (Direct Cable) - 27 - OUT