Download MX Component Version 3 Operating Manual

6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
MELSOFT
(b) QC24N
Using the QC24N requires a sequence program to set the following buffer
memory addresses.
The following table indicates the buffer memory addresses that must be set
and the sequence program.
Setting Item (Buffer Memory Address)
Settings
Setting in Sample Sequence Program
Modem connection channel designation (2EH)
0: Not connected (modem function is not
used)
1: CH1 side interface
2: CH2 side interface
1 (CH1)
Initialization data No. designation (34H)
0H: Send of initialization data specified in the
sending user registration frame specifying
area
7D0H to 7D4H: Initialization data No.
2000 (No. 2000)
Q6TEL connection designation (36H)
0: Does not make communication as Q6TEL.
1: Makes communication as Q6TEL.
1 (Communicate as Q6TEL)
No-communication interval time designation
(37H)
0: Unlimited waiting
1 to 120: No-communication interval time (line
disconnection waiting time)
10 (10 minutes)
1
1: The following initialization data are factor-registered to the QC24N.
When the modem used corresponds to the initialization data (7D0H to 7D4H), specify the following
registration number.
When using the modem where the initialization data have not been registered, register the AT command to
2
the E PROM or buffer memory address (1B00H) of the QC24N.
Registration No.
Hexadecimal Decimal
Corresponding Device
Initialization Command
Maker
Type
7D0H
2000
ATQ0V1E1X1\J0\Q2\V2\N3S0=1
7D1H
2001
ATQ0V1E1X1\Q2\V2\N3S0=1
7D2H
2002
ATQ0V1E1X1&K3\N3S0=1
7D3H
2003
ATQ0V1E1X1&H1&R2&A3&D2S0=1
Omron
ME3314B
7D4H
2004
ATQ0V1E1X1\J0\Q2\N3S0=1
Sun Electronic
MS336AF
6 - 80
Aiwa
PV-AF2881WW
PV-BF288M2
Micro General Laboratory
MC288XE
MC288X1
Microcom
DESKPORTE22.8S
DESKPORTE33.6S
6 - 80