1
Download MX Component Version 3 Operating Manual
Transcript
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE MELSOFT (3) Setting the logical station number (Setting on communication setting wizard) Logical station number setting will be described using the system example for 1:n communication. 1) Start the communication setup utility and choose the communication setting wizard. 2) Type "1" in Logical station number and click the Next> button. 3) Make settings as indicated below and click the Next> button. PC side I/F Connect port Time out : Serial : COM1 : 10000 4) Make settings as indicated below and click the Next> button. PLC side I/F Module type Station No Baud rate Parity Control : C24 module : AJ71QC24 :1 : 19200 : Odd : DTR or RTS Control (To the next page) 6-9 6-9
