Download First Steps

page
1
page
2
page
3
page
4
page
5
page
6
page
7
page
8
page
9
page
10
page
11
page
12
page
13
page
14
page
15
page
16
page
17
page
18
page
19
page
20
Transcript 
DNP/SK18 First Steps – Getting Started
2.7
Checking IP Address of PC
Make sure that your PC is using the right IP address for the Ethernet-based TCP/IP
communication with the DIL/NetPC. Use 192.168.0.1 or 192.168.0.254 for your PC and
192.168.0.126 for the ADNP/1520.
Figure 11: Windows-PC IP address check with ipconfig
Talk to your network administrator if you have problems with the IP address
understanding.
SSV EMBEDDED SYSTEMS
11
Related documents
First Steps IGW/100 - SSV Software Systems
First Steps IGW/100 - SSV Software Systems
MB/1520-100 Starter Kit: First Steps
MB/1520-100 Starter Kit: First Steps
User Manual - SSV Software Systems
User Manual - SSV Software Systems
Abocom HP2000 User's Manual
Abocom HP2000 User's Manual
DNP/SK25 Embedded Linux Starter Kit
DNP/SK25 Embedded Linux Starter Kit
ADNP/ESC1 µClinux Starter Kit: First Steps
ADNP/ESC1 µClinux Starter Kit: First Steps
DNP/5280 Revision 1.21 – User Information
DNP/5280 Revision 1.21 – User Information
DNP/2110 Linux Starter Kit: First Steps
DNP/2110 Linux Starter Kit: First Steps
DNP/5280 µClinux Starter Kit: First Steps
DNP/5280 µClinux Starter Kit: First Steps
DNP/SK23-WCE Windows CE Starter Kit
DNP/SK23-WCE Windows CE Starter Kit
DIL/NetPC DNP/1110 Starter Kit
DIL/NetPC DNP/1110 Starter Kit
3 installing the ssh connection
3 installing the ssh connection