1
Download Encom Stratos User Guide
Transcript
ENCOM STRATOS plus USER MANUAL Network Setup ENCOM STRATOS makes use of certain network services to carry out its configuration and management tasks. Because of this, you must configure your network's firewalls and routers to allow access to these services. In particular, the following ports must be opened between the radios and the computer on which ENCOM STRATOS is running: Service Protocol Port ICMP (Ping) Not Applicable Not Applicable FTP TCP 20, 21 SSH TCP 22 ENCOM Mesh Interface UDP 1966 ENCOM Mesh Interface TCP 1968 ENCOM Radio Heartbeat UDP 5678 ENCOM Radio Interface TCP 8291 ENCOM Radio Interface TCP 8728 ENCOM Radio Interface UDP 20561 ENCOM Radio Heartbeat packets are broadcast packets. Because of this, they are not able to pass through routers or firewalls. This means that the STRATOS automatic radio discovery feature may not work if a router or firewall is present between the computer running STRATOS and the radios. In this case, you need to use the Add or Find radio functions to manually add the radios to the radio list. For ENCOM STRATOS plus Version 2.1.71 Page 21 © 2010-2015 Encom Wireless Data Solutions Inc.
