Download E-swipe Manual - E

Poll J Reader
Polling a J reader differs from polling an STA and DC
readers. Since the reader does not store the data, it
should be connected to your PC and the polling function
should be running as long as the employees are
scanning their ID's.
Precisely, you can poll a J reader as follows:
1. From the E-swipe's main menu, select Upload.
2. Then select Poll J Reader.
3. The Upload Data File dialog window will appear. If
you want to save the uploaded data in a separate file,
enter a path and name for it in the File Name text box.
Then click on the Open button. If you don't want to save
the data click on the Cancel button.
4. The Cancel Send/Receive window will appear.
5. If the protocol is disabled, the upload command will
poll the single reader that is connected to the serial port.
If the readers are networked, the upload command will
poll each reader in the range one at a time.
The data coming from the reader will not contain a date
or time. The Poll command adds the system's time and
date to the data at the time of polling. The polled data
will appear in the View window as follows:
E-swipe User's Guide
66