Download User`s Guide

During this screen the system negotiated for the reader ID code with the hardware. Important!! Do not
remove the GC-01 Reader from the GC-02 Docking station until this step is finished.
If the reader has been accepted into the system, you will see the following message.
Now you may type in the name to be assigned to that reader. This field is totally open to your own
terminology or naming requirements.
In any case that the reader is not valid, or already exists in the system, you will be notified with the
following screen which explains the issues.
In this situation, you can present another reader to the dock and Read the ID, which will be accepted only
if it is a valid ID code and if it is not already installed in the system.
Description field for Readers.
Copyright 2000. Rosslare Enterprises Ltd.
Page 29 of 50
DigiToolTM