Download User`s Guide

Installing the DigiToolTM GS-01 Software
for the PC, using the Installation Wizard.
The DigiToolTM GS-01 Software package requires software to be installed on the hard disk
of the PC, and into the physical working memory of the PC.
Minimum PC- Requirements:
1) Windows ® 95/98/ME or Windows ® NT/2000.
(**Windows is a registered trademark of Microsoft Corporation, all rights reserved Microsoft)
2) CD ROM Drive
3) 16 Mb RAM
4) Serial Port (9-pin Connector) & 1 Free COM Port.
5) Approximately 20 Mb Hard Disk Space
Installing the Software on the PC – Use the Wizard:
The installation of the DigiToolTM GS-01 from the CD-ROM is a mostly automated process done by a
smart installer program.
1) Place the CD-ROM in the CD-ROM Drive and open the drive window on the screen.
2) Find the file named Setup.exe and double click on the icon.
Follow the onscreen instructions of the installation program, to specify all of the directories and features
for your installation. Click on the “Next” button to continue with the installation of the program.
Copyright 2000. Rosslare Enterprises Ltd.
Page 8 of 50
DigiToolTM