1
Download Unilink Software
Transcript
Hardware Configuration With the hardware supply disabled, connect the PC interface (X6, RS232) of the servo amplifier to the PC serial interface using a three-wire cable (do not use a nullmodem type connection cable). CAUTION Only disconnect and connect the cable with the power supply off (amplifier and PC). Failure to observe this precaution can result in injury or equipment damage. The amplifier interface is electrically isolated by an optocoupler, and uses the same voltage as the CANopen interface. Minimum configuration for the computer: 24 CPU 80486 or above Operating System WINDOWS 95(c)/ 98/ ME/ 2000/ NT 4.x Graphics card Color, WINDOWS compatible Drives Floppy disk drive Hard disk with 5Mb of free space CD-ROM drive for online documentation RAM Memory 8Mb minimum Link One free serial link (COM1, COM2, COM3, COM4) This link must not be used by another software program or hardware device.
