Download QCPU User`s Manual(Hardware Design

CHAPTER 6 CPU MODULE
Basic model QCPU
Item
Q00JCPU
Step relay [S]*7
Q01CPU
2048 points (S0 to 127/block) (The number of device points is fixed.)
Index register [Z]
10 points (Z0 to 9) (The number of device points is fixed.)
Pointer [P]
No. of device points
Q00CPU
300 points (P0 to 299) (The number of device points is fixed.)
128 points (I0 to 127) (The number of device points is fixed.)
The cyclic interval of system interrupt pointers I28 to 31 can be set up by parameters.
Interrupt pointer [I]
(2 to 1000ms, 1ms unit)
Default values I28: 100ms, I29: 40ms, I30: 20ms, I31: 10ms
Special relay [SM]
1024 points (SM0 to 1023) (The number of device points is fixed.)
Special register [SD]
1024 points (SD0 to 1023) (The number of device points is fixed.)
Function input [FX]
16 points (FX0 to F) (The number of device points is fixed.)
Function output [FY]
16 points (FY0 to F) (The number of device points is fixed.)
Function register [FD]
5 points (FD0 to 4) (The number of device points is fixed.)
No. of device tracking words
----
6
Device for accessing the link device directly.
Exclusively used for CC-Link IE Controller Network and MELSECNET/H.
Link direct device
Specified form: J\X, J\Y, J\W, J\B,
J\SW, J\SB
Intelligent function module device
Device for accessing the buffer memory of the intelligent function module directly.
Specified form: U\G
L0 to 2047 (default)
Latch range
(Latch range can be set up for B, F, V, T, ST, C, D, and W.) (Setting by parameters.)
RUN/PAUSE contact
One contact can be set up in X0 to 7FF for each of RUN and PAUSE. (Setting by parameters.)
Year, month, date, hour, minute, second and day of the week
(Automatic leap year detection)
6.2 Specifications
6.2.1 Basic model QCPU
Accuracy: -3.2 to +5.27s(TYP.+1.98s)/d at 0°C
Clock function
Accuracy: -2.57 to +5.27s(TYP.+2.22s)/d at 25°C
Accuracy: -11.68 to +3.65s(TYP.-2.64s)/d at 55°C
Allowable momentary power failure
time
20ms or less (100VAC or
more)
5VDC internal current consumption
H
External dimensions
W
D
0.26A*8
98mm (3.86 inches)
245mm (9.65 inches)*9
98mm (3.86 inches)
Varies depending on the power supply module.
0.25A
0.27A
98mm (3.86 inches)
27.4mm (1.08 inches)
89.3mm (3.52 inches)
*6
0.13kg
0.66kg
Each of parameter, intelligent function module parameter, sequence program, SFC program, device comment, and initial
device value files can be stored.
The number of points can be changed within the setting range.
*7
*8
*9
(
Qn(H)/QnPH/QnPRHCPU User's Manual (Function Explanation, Program Fundamentals)
The step relay is a device for the SFC function.
The value is for the CPU module and base unit together.
The value includes the CPU module, base unit, and power supply module.
Weight
*9
*5
Remark
For the general specifications, refer to Page 113, CHAPTER 5.
143