Download Concrete-Envelope

Transcript
Concrete-Envelope – User Manual
Command :
FINISH-ENVELOPE
Syntax
:
FINISH-ENVELOPE
Example
:
FINISH-ENVELOPE
Control Data Commands
Description:
The FINISH-ENVELOPE instruction marks the end of a global envelope over several
different sections or sets. The envelope must previously have been started using a
BEGIN-ENVELOPE instruction. The effect of the command will be to print the
envelope and to store it on backing file if WRITE ON has been specified. The CHART
NONE command will disable the printing.
Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.
5-14