Download Concrete-Envelope

Transcript
Concrete-Envelope – User Manual
Control Data Commands
Command :
BEGIN-ENVELOPE
Syntax
:
BEGIN-ENVELOPE number (title)
Example
:
BEGIN-ENVELOPE 1 ENVELOPE OVER SETS 3 AND 4
Description:
The BEGIN-ENVELOPE command starts the creation of a global envelope, i.e. an
envelope over several different sections, or over several different sets of elements.
Global envelopes are in addition to the individual and class envelopes that are normally
created. An envelope number must be given and an optional title may be associated with
the envelope. While global envelopes are active, any DO-CHECKS instructions will
cause the envelopes to be extended by the new class envelopes created.
A FINISH-ENVELOPE command is available to end this overall enveloping and to
print the latest envelopes. Intermediate printing may be achieved via the PRINTENVELOPE instruction.
Overall envelopes will be stored when a WRITE command is issued. The envelope
number may be used to identify and recall this stored envelope in CONCRETECHECK. An envelope will be stored for each of the four nodal classes. An optional
forty character title may be associated with the envelope.
Global envelopes are identified by having group/set and node/location numbers of zero.
The envelope and class numbers are, of course, non-zero.
Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.
5-2