Download Mikrotik

Transcript
Manual:PPP AAA
87
User Database
Sub-menu: /ppp secret
PPP User Database stores PPP user access records with PPP user profile assigned to each user.
Properties
Property
Description
caller-id (string; Default: )
For PPTP and L2TP it is the IP address a client must connect from. For PPPoE it is the MAC address
(written in CAPITAL letters) a client must connect from. For ISDN it is the caller's number (that may
or may not be provided by the operator) the client may dial-in from
comment (string; Default: )
Short description of the user.
disabled (yes | no; Default: no)
Whether secret will be used.
limit-bytes-in (integer; Default: 0)
Maximal amount of bytes for a session that client can upload.
limit-bytes-out (integer; Default: 0) Maximal amount of bytes for a session that client can download.
local-address (IP address; Default: ) IP address that will be set locally on ppp interface.
name (string; Default: )
Name used for authentication
password (string; Default: )
Password used for authentication
profile (string; Default: default)
Which user profile to use.
remote-address (IP; Default: )
IP address that will be assigned to remote ppp interface.
remote-ipv6-prefix (IPv6 prefix;
Default: )
IPv6 prefix assigned to ppp client. Prefix is added to ND prefix list enabling stateless address
auto-configuration on ppp interface.Available starting from v5.0.
routes (string; Default: )
Routes that appear on the server when the client is connected. The route format is: dst-address gateway
metric (for example, 10.1.0.0/ 24 10.0.0.1 1). Several routes may be specified separated with commas.
This parameter will be ignored for OpenVPN.
service (any | async | isdn | l2tp | pppoe Specifies the services that particular user will be able to use.
| pptp | ovpn | sstp; Default: any)
Active Users
Sub-menu: /ppp active
This submenu allows to monitor active (connected) users.
/ppp active print command will show all currently connected users.
/ppp active print stats command will show received/sent bytes and packets
Properties