1
Download SmartRack User Manual
Transcript
SmartRacks are fitted with ripple rejection circuitry providing immunity from mains-borne disturbances up to 2OVpp at frequencies above 10kHz. In rare instances it may be necessary to provide immunity at lower frequencies, and a supplementary ripple rejection card is available to d o this. O n e required per SmartRack SmartRack numbering sheets are available as spare parts, numbering up to 9 6 0 Part Number Part Number Part Number Part Number Y2.SR003.1 Y2.SR003.2 Y2.SR003.3 Y2.SR003.4 - 1 240 24 1 480 481 720 721 960 - Load terminal extender kits It will in some cases be necessary to use cable with a larger cross-sectional area than the capacity of the standard load phase terminals provided, where very long cable runs are required. In this case, the following extender kits are available, for 2 . 5 k W and 5kW dimmers only. (Note that 1OkW dimmers are already provided with terminals for 35mm2 cable). Part Number Y2.SR006.0 Part Number Y2.SR006.1 4 x 2.5kW Output terminal extender kit (up to 10mm2) 2 x 5kW Output terminal extender kit (up to 1 6mm2) page 55
