1
Download D3PLOT 11.0 user manual
Transcript
D3PLOT Use ANIM > SET_STATES > Custom... to map the detailed state selection panel: User manual Version 11.0, March 2013 Then truncate the number of states in all windows so that they all have the same number of states. In this example it has been limited to 12states. BY_TIME... Synchronising animation by time across dissimilar models. The "by state" animation behaviour above is the default, chosen because it is simple and minimises memory usage, but it has disadvantages when models with different state time intervals are processed. It is possible to interpolate between states and so to animate by user-defined time interval, which has the side-effect of synchonising models with dissimilar state times. This is done by using the BY_TIME... option. (Interpolation can be used on single models as well, usually to give a smoother animation, although this is less common.) You define <start time> <time interval> <end time> And D3PLOT will interpolate states as required to achieve the specified intervals. Interpolation is performed using a simple linear factor on the two "real" states that bound the required time. You can control animation on a per frame basis using the slider and associated controls at the top of the window, exactly as described in section 4.5.1 above. Page 4.106
