1
Download D3PLOT 11.0 user manual
Transcript
User manual Version 11.0, March 2013 D3PLOT (NO_)SOLID_STRESS Turn on/off output of stress tensor for solid elements (reordered database only) (NO_)SOLID_PLASTIC Turn on/off output of plastic strain for solid elements (reordered database only) (NO_)SOLID_VM_STRESS Turn on/off output of Von Mises stress for solid elements (reordered database only) (NO_)SHELL_VM_STRESS Turn on/off output of Von Mises stress for shell elements (reordered database only) (NO_)TSHELL_VM_STRESS Turn on/off output of Von Mises stress for thick shell elements (reordered database only) (NO_)SOLID_VM_STRAIN Turn on/off output of Von Mises strain for solid elements (reordered database only) (NO_)SHELL_VM_STRAIN Turn on/off output of Von Mises strain for shell elements (reordered database only) (NO_)TSHELL_VM_STRAIN Turn on/off output of Von Mises strain for thick shell elements (reordered database only) (NO_)SHELL_ENG_STRAIN Turn on/off output of Engineering strain for shell elements (reordered database only) LC_COMBINATION <action> (NO_)SPOTWELD Turn on/off output of Spotweld data (reordered database only) (NO_)SPC Turn on/off output of SPC data (reordered database only) (NO_)SPRING Turn on/off output of Spring data (reordered database only) (NO_)SEATBELT Turn on/off output of Seatbelt data (reordered database only) (NO)_NODES_FOR_ZTF Turn on/off output of nodes for ZTF items (DONT)_EMBED_ZTF Do/Don’t embed ztf file in database (reordered database only) Combine Nastran linear static subcases. Valid <action>s are: Page A.117
