Download ComBricks User Manual - Streamline Process Management

Transcript
COMbricks – User Manual
Fig. 54 - Fiber optic delay time
9.3
Baudrate detection
See paragraph 7.5 for an explanation.
9.4
Fiber optic modules in redundancy mode
For correct pass-through of telegrams in redundancy mode, keep in mind that the delay time is longer in
this mode. Increase the MinTSDR busparameter to at least 20 bittimes.
_______________________________________________
Version 5.4.0 – June 2014
COMbricks-User-Manual1-EN.docx
Page 93 / 184
© PROCENTEC 2014 - Copyright - all rights reserved