Download sonet - Artisan Technology Group

Transcript
E1 and Timeslot Network Testing
Set up for E1 Testing
4.
Use VALUE to set the payload to DS3/E1, E1, or TS.
• DS3/E1: To test E1 signals mapped to and from a DS3 on a
higher-rate signal.
• E1: To test clear channel E1, timeslot traffic, or fractional E1.
• TS: To test timeslot traffic on an E1 (Tx and Rx must be set to
E1).
E1/TS
5. Press MENU-down. The E1 test operation screen is displayed (see
next section).
14–3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com