Download sonet - Artisan Technology Group
Transcript
Using Remote Control Use the SCPI/IEEE-488 Interface Use the SCPI/IEEE-488 Interface After you have connected the 156MTS and SCPI controller, and configured the test set’s interface parameters, you are ready to activate SCPI mode. 1. Using the SCPI/IEEE-488 interface on the controller device, send the reset string “*RST” to the test set, or use the :SYST:REM command. These commands puts the test set in SCPI/HP-IB mode. *RST sets all parameters to their default values; :SYST:REM maintains the current parameter settings. Refer to the SCPI/HP-IB Programmer’s Manual for more information. 2. When the test set is in SCPI mode, the display changes to show the following: 1 SCPI Remote Mode Final: 00:00:00.00 Trouble Scan >>>>>>> SONET LOS: HIS DS3 LOS: HIS SONET LOF HIS DS3 LOP: ON SONET LOPNTR: ON DS3 FFM: ON PATH CV: 18273645 More... Enable Display of Results and Alarms SONET>Off ATM>Off DS3>Off PLCP>Off T-Carrier>Off VT1.5>Off Results Level>Detail Trouble Scan>Off Note: When the test set is in SCPI mode, most front-panel controls are inoperative. Setup operations must be done using SCPI commands from the controller. 3. Use the FIELD and VALUE keys to configure which results are shown on the test set display while the unit is in SCPI mode. 4. Next use FIELD to select Results Level and then use VALUE to set the results level for the level of measurement detail you want. General 5. Use the RESULT keys to scroll through measurement screens in the upper half of the display. The measurement screens available depend on the results enabled in the lower half of the display. 25–8 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Related documents
Agilent Technologies Weather Radio OmniBER 718 User's Manual
SOURce Command - Artisan Technology Group
Service Manual
The DatasheetArchive - Datasheet Search Engine
N1645A Service Advisor SONET/SDH Line Interface Test
SCADAPack E Firmware Update Technical Reference
29/03/2014 Lyon Saint-Exupéry
T-BERD 307 DS3/DS1 ANALYZER USER`S MANUAL
Model 2345 T3 Fiber Optic Modem User Manual
BW Generic User Manual for Three 12-ft Trampoline Models
User Manual Master Clock WDP-Y2/Y4/Y8
July 19, 2013 Via Email Jeffery Goldthorp Chief, Communications