Download Code 39 Set Length 1 - SC

Enter/Exit Programming Mode
Multiple Label Reading
Multiple Labels Ordering by Code Symbology
This feature allows you to specify the order multiple labels are transmitted by symbology type,
when Multiple Labels per Frame is enabled. See page 260 in “References” for detailed information on setting this feature.
$CSNMS
Select Symbologies for Multiple Labels Ordering
To configure this feature, scan the ENTER/EXIT PROGRAMMING MODE bar code above, then the bar code at
left followed by the digits From the alphanumeric characters In Appendix d, keypad representing your desired
Character(s). end by scanning the enter/exit bar code
again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
000000000000 = Random order
Multiple Labels Ordering by Code Length
Specifies the transmission ordering by code length, when Multiple Labels per Frame is enabled.
$CSNMT00(CR)
DEFAULT
Multiple Labels Ordering = Disable
$CSNMT01(CR)
Transmit Increasing Length Order
86
$CSNMT02(CR)
Transmit Decreasing Length Order
QuickScan™ I QD24XX/QBT24XX/QM24XX