Download Intelligent Sensor Interface for Control Operations Manual and

Transcript
NexSens Technology, Inc.
5.2 Grounding Protection
Electronic circuits are susceptible to voltage surges. The iSIC has on-board transient voltage
suppression devices. Connect the ground lug to a proper electrical ground (i.e. pipe or metal
fixture).
For outdoor applications, use the copper wire supplied with the A38 ground kit to connect the
ground lug to the rod’s ground clamp. The rod should be driven into the ground as deep as
possible and located near the equipment. In addition, make sure the copper wire has no sharp
bends and is as short as possible. Be sure to locate the clamp on the rod before driving it with a
sledgehammer or fence post driver.
A38 Features:
•
4 ft. copper coated
ground rod
•
Bury copper ground
rod into the earth.
•
8 ft. of #8 solid
copper wire
•
•
Rod/Wire clamp
•
Comes assembled
Attach copper wire to
ground lug directly
onto the iSIC or to
the A39 lightning
protector.
A38-P Features:
iSIC User’s Manual
Installation:
Installation:
•
Pipe attachment
ground kit
•
Attach clamp to
grounded pipe
•
Clamps to ¾ in - 1 ¼
inch pipe
•
Attach bar copper
wire end to iSIC
ground lug.
•
8 ft of #8 copper wire
49