Download "user manual"

Transcript
上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
Fig. 4-32 Calibration after tool change
4.10. Machining Track Window
When the machine tool is implementing machining procedure or doing simulation, the machining
track window will capture the real-time machining track. The user then can view the cutter’s route
directly in this window and in this way the proper implementation of machining procedure is ensured.
Machining track window adopts three-dimensional view mode and the user can design this
window through [view (V)| customize (M)]. Please refer to section “Attribute” mode below for detail.
Under three-dimensional tracking mode, the various functions this system provides enable the
user to zoom in/out and view the graph from different orientations and at proper scaling ratio.
Fig. 4-33 Processing track window
Click the right mouse button in the window and a shortcut menu will pop up, as illustrated below:
32
Specialized, Concentrated, Focused