Download LightCorder

MI DI
The 5-pole DIN socket is not used.
HARDWARE INSTALLATION
The LightCorder can be fixed with mounting hardware in a rack, wall, or flat
surface. The required dimensions can be found on the inside of the cover of this
manual.
The LightCorder can also be used as a portable device and operated from any flat
surface. A pair of legs are located at the rear of the device and can be extended to
enhance usability.
SOFTWARE INSTALLATION
If you want to schedule light shows using a PC then the Martin LightCorder
Scheduler program (included) must be installed on a PC running Windows
95/98/ME/2000/XP.
To install the LightCorder Scheduler:
1 Insert the Scheduler CD-ROM in the computer
2 Open Windows Explorer to display the root folder of the CD-ROM
3 Execute setup.exe and follow the on-screen instructions.
4 For information on using the LightCorder Scheduler, see “Scheduling” on page
29.
10
Setup