1
Download sdh_operating manual
Transcript
ANT-20/ANT-20E Mainframe, SDH Version Abbreviation Meaning LOF Loss of Frame LOM Loss Of Multiframe LOP Loss Of Pointer LOP-P Loss Of Pointer - Path LOP-V Loss Of Pointer - VT LOS Loss Of Signal LP Lower Order Path Low-pass Filter (Jitter VI) LPAC Loss of Performance Access Capability LPRDIEC Lower Order Path RDI Connectivity Defect LPRDIEP Lower Order Path RDI Payload Defect LPRDIES Lower Order Path RDI Server Defect LSS Loss of Sequence Synchronisation (Pattern Loss) LTC Loss of Test Channel for Tandem Connection: Loss of Tandem Connection LTI Loss of all Incoming Timing references M M1 MS-REI byte (MSOH) MS-REI byte (TOH) MA Maintenance Adaption byte (G.832) MBS Maximum Burst Size MDEV Modified Allan Deviation MFE Multiframe Error MS Multiplexer Section MS-AIS Multiplexer Section AIS MSB Most Significant Bit MSOH Multiplexer Section Overhead MTBF Mean Time Between Failures MTIE Maximum Time Interval Error MTJ Maximum Tolerable Jitter MUX Multiplexer N N1, 2 Network operator bytes (POH) for Tandem Connection Monitoring (TCM) NCC Non-Conforming Cells Table SA-10 Standards/Abbreviations Standard abbreviations used in this manual (continued) SA-17
