Download CCLINK Driver Manual

Diagnostics and Troubleshooting
Driver Manual
CC-Link ♦ ProLinx Gateway
CC-Link version 1.10 Local Station & Intelligent Device
Error Code
(Hexadecimal)
Error
Error Cause (Details)
B305
Error station
detected by
line test
(response
data error)
An error was detected in the
response data looped back
as a result of line test
execution.
B306
Specified
station is not
head station
B307
All stations
faulty
Corrective Action
Detectability
Master
Station
Local Station
or Intelligent
Device
Station
Replace the slave
station subjected to
the line test.
Y
N
A station other than the head
station was specified for the
temporary error invalid
request.
Specify a head
station for the
temporary error
invalid request.
Y
N
All stations were in a data
link error state when either of
the following requests was
issued:
Request again after
the data link
becomes normal.
Y
Y
SB0000 (data link restart)
SB0002 (data link stop)
B308
Total
number of
slave
stations
(station
number
error)
The station number is outside
the range 1 to 64.
Check the station
numbers of the
mounted gateways
for any duplication
(including occupied
station numbers).
Y
N
B309
Station
number
duplication
The station number of the
connected gateway was
duplicated (including
occupied station numbers).
Note that this excludes
duplication of the head
station number.
Check the
gateways’ station
numbers.
Y
N
Inconsistenc
y between
connected
gateway and
parameter
(connected
gateway >
parameter)
The station types of the
gateway are different from
those set as parameters, or
the number of occupied
stations of the gateway is
greater than the parameter.
Example:
Set correct
parameters.
Y
N
Connected
gateway
Parameter
Setting
Remote
device
Remote
I/O
Intelligent
device
Remote
I/O
Remote
device
ProSoft Technology, Inc.
May 21, 2009
Page 61 of 98