1
Download C - Index of /sup
Transcript
Commands library $PDAS,SESSN e *hh <CR><LF> c--c : Session label (8 characters max.) : Checksum (optional) : End of command • Information supplement - This command should be used in conjunction with $PDAS,EXPSES (see page C-36). - With AUTPW selected as the power control type (see $PDAS,EXPSES), the receiver will be turned on 5 minutes before the beginning of the session, and turned off 30 seconds after the end of the session. C - For a session defined with Recording indicator=1, and provided the recording firmware is present, a file will be created on the PCMCIA at the beginning of this session. The file will be named <session_label>.Dxx, where xx is a software-set order number, and all outputs performed on port P will be written into that file until the end of the session. DSNP C-89
