Download C - Index of /sup

Transcript
DSet Pack Software
Using DSet Pack connected to a DSNP GNSS/GPS receiver
• Changing the options in the Recorder Pane
Directory : Used to specify the directory to which
you wish to record the data from the
receiver. Clicking the button to the
right opens a dialog box that allows
you to navigate through the directory
tree on your hard disk or a floppy disk,
and select the desired destination
directory.
File Name : Used to specify the name of the file to
which you wish to record the data from
the receiver.
Unless a maximum size is selected for
the file, you are also allowed to enter
an extension into the associated box.
File Max Size : Used to specify whether a single file
should be created on the disk (No
Limits option) or the file should be split
into 0.7 MB or 1.4 MB segments (with
a view to storing it to floppy disks).
If you elect to split the file into
segments, then the system will
automatically add 001 as extension to
the name of the first segment. This will
automatically be incremented for each
file segment generated, if the file
exceeds the File Max Size selected.
Start Recording : Causes the data to be recorded to the
specified file until you click the button
again. (The label of the button
changes from Start Recording to Stop
Recording).
DSNP
G
G-45