Download 21209885F

TÜV Rheinland Energie und Umwelt GmbH
Air Pollution Control
Report on the suitability test of the ambient air quality measuring system
Model 5030i SHARP with PM2.5 pre-separator of the company Thermo Fisher
Scientific for the component suspended particulate matter PM2.5,
Report No.: 936/21209885/F
6.1
Page 85 of 424
4.1.7 Data output
The output signals shall be provided digitally (e.g. RS232) and/or as analogue signals
(e.g. 4 mA to 20 mA).
6.2
Equipment
PC with “iPort” software.
6.3
Performance of test
The test was carried out using a PC with the software “iPort“(via Ethernet).
The AMS was connected to a PC via Ethernet and the data were downloaded.
The AMS also offers the possibility of outputting analogue signals and measured signals or
communicating via serial interface RS 232/RS 485.
6.4
Evaluation
The measured signals are offered as follows at the rear side of the instrument:
Analogue:
0-0.1, 0-1, 0-5 and 0-10 V
selectable concentration range
0-20 or 4-20 mA
selectable concentration range
Digital:
6.5
Ethernet with “iPort“ software
RS 232 / RS 485 interface
Assessment
Measured signals are output as analogue signals (in V or mA) and digitally (via Ethernet,
RS 232, RS 485).
The connection of additional measuring and peripheral devices to the respective ports of the
devices is possible (e.g. analogue inputs).
Minimum requirement fulfilled? yes
740300_2013_936_21209885F_EN.docx