Download Ch-10 Automation Interfacing

10.01 Sending a Log to Automation
To send the commercial log to automation, the Natural Log system daily log must have been generated and
edited, if necessary. The log is converted using the [Convert-Log][Convert-Log] [Automation Log] menu
in the Log Editor to the proper format on a floppy disc or across a LAN to the automation system.
Note: There are some data values [such as Station Number above] that are required for certain automation
systems. Also some restrictions apply to certain automation systems, so you must check the section of this
manual that applies to your automation system before entering any orders into Natural Log.
Page 10-2
Natural Log User Manual