Download AC Servo System UserManual

Transcript
MSHD User Manual
3.3.3
3.3.4
3.3.5
3.3.6
3.3.7
Shielding and Bonding..........................................................................32
Input Power Filtering.............................................................................32
Motor Line Filtering................................................................................33
I/O Signal Filtering.................................................................................33
Additional EMI Suppression Recommendations...................................33
3.4 Electrical System Considerations.....................................................34
3.4.1 Fusing....................................................................................................34
3.4.2 Leakage Current Considerations...........................................................34
3.4.3 Residual Current Protective Device (RCD)...........................................34
3.5 Mechanical Installation.....................................................................34
3.5.1 Mounting the MSHD..............................................................................34
3.5.2 Mounting Multiple Units.........................................................................35
3.6 Electrical Installation.........................................................................35
3.6.1
3.6.2
3.6.3
3.6.4
3.6.5
3.6.6
3.6.7
Connect Motor.......................................................................................36
Connect STO.........................................................................................36
Connect Regen.....................................................................................37
Connect Motor Feedback......................................................................39
Connect Controller I/Os.........................................................................40
Connect Machine I/Os...........................................................................42
Connect AC Input Voltage.....................................................................43
3.7 Set the Drive Address.......................................................................45
3.8 Connect to PC..................................................................................45
3.9 ServoStudio Software Installation.....................................................47
3.10 Power Up........................................................................................47
4 ServoStudio.............................................................................. 48
4.1 Overview...........................................................................................48
4.1.1 Interface Elements................................................................................49
4.1.2 Schematic Diagrams.............................................................................50
4.1.3 Parameter Values..................................................................................50
4.2 Dashboards......................................................................................51
4.2.1 Terminal.................................................................................................51
4.2.2 Scope....................................................................................................52
4.2.3 Expert....................................................................................................53
4.3 Wizards.............................................................................................57
4.3.1 Setup.....................................................................................................57
4.3.2 Tuning....................................................................................................57
4.4 Preferences......................................................................................57
Rev. 1.0
4/10/2012
4