Download Gesa

Gesa
CUSSoftware Administrator and Operator Manual
issue I revision 0- 12/09/2001
e 44ol 91
2.2.10 MANUAL TRANSFER OF SCHEDULES TO ISS.
User profile
CUS Mission Planner
Connection
VT200
Start time
15:00 UTC
Duration
a few minutes
Frequency
Daily
References
Doc. R-1, Chapter 7.2.1
Related tables and
files
Scope
The Schedule Transfer is normally handled by the CUS Automatic Event Scheduler. This procedure is only
used if it is necessary to manually transfer the schedules (ie. AES is not running).
However, the error checking (STEP 5) of this procedure must be performed by the operators on a daily
basis.
Ensure that CUS (generated and) transferred to ISS the Acquisition and Processing Schedules for all
involved stations and the Distribution Schedules for ISS (LBR FDPs) or for NSC (SAR FDPs).
(
Input
(Describes the input (e.g. file) required by the procedure.)
Initial conditions
NOTE: BEGIN THIS PROCEDURE ONLY AFTER SCHEDULE GENERATION CUS OP-MAN
PROCEDURE #4.2.4
Sequence of operations
NOTE: THIS IS THE SECOND PROCEDURE IN THE DAILY GENERATION, TRANSFER AND
FAXING OF SCHEDULES
1) Connect to CUS and Logan with usemame XXOPOOOl,Password ....
2) Enter the command:
• HOME
• START_PROC
•
29
• y
This will start a detached process called SCGP_XTAS_xxxx where xxxx is a number - write it down.
• NOTE:If this process does not start up correctly, then enter:
• CLEAN_PROC
and answer YES to any questions and repeat this step again.
3) Enter: