Download QuickWorks® User Manual with SpDE Reference

Transcript
QuickWorks User Manual - Release 2008.2.1
I.3 Installing QuickTools Client
The Client installation starts with the following welcome message:
> Welcome to QuickLogic's QuickTools client installation for $OS
> Version: 9.5
1. Confirm if you want to install the client. To setup the Client type y, otherwise type n or
press Enter to abort setup.
> Do you want to perform client installation? [y/n], (default = n):
2. Specify the full path of the Server installation directory.
> Specify the path of the QuickTools server installation
[.../quicktools_95]:
3. The setup will copy Windows configuration file(s) to user's directory. If you are root,
specify the user who will use SpDE.
> NOTE: Copying the .ini file to a user's directory
> Enter the user name that will use SpDE: < ... >
4. After a successful client installation, the following message is displayed:
> Installation completed successfully.
> Please consult the QuickTools Users Guide for instructions.
> Other steps required to run spde (see install instructions):
> 1) Setup your environment as follows:
-> If you are using C shell or one of its derivatives, add following
command in ~/.cshrc or ~/.login source .../quicktools_95/spde_env.csh
else
-> If you are using Bourne shell or one of its derivatives, add following
command in ~/.bashrc or ~/.profile .../quicktools_95/spde_env
> 2) Restart the window manager before running SpDE
Set up the environment variables as mentioned at the end of installation and restart the
Windows Manager. This completes the Client installation.
572
•
•
•
•
•
•
www.quicklogic.com
© 2008 QuickLogic Corporation