Download Users manual

Power Plotter Manual
It opens the panel to set the output colour curves:
Output Curves Panel
In the first box on the left you can manually retouch the active curve shape.
The colour curve can be selected from the centre list or clicking the selected
colour.
The two buttons in the middle, RESET and PREVIOUS, restore the curves
to the neutral or to the last saved one, respectively.
The two Black ink limit and Total ink limit boxes allow limiting the colour
amount on the sum.
In general it may be convenient to use the Total limit setting only when the
print tends to be too wet. This parameter decreases the colour sum value
without excessive alteration of the chromatic quality.
116