Download Users manual

Power Plotter Manual
Where Multipage handling has been enabled, the panel above with the
choice of the page to be printed will be shown.
Proceed by pressing the Continue button.
At this point it is possible to enable a series of additional options.
Generate Prn file: prints the job to a file instead of sending it to the printer
and allows this output to be saved so that it may be subsequently sent to
the plotter using direct print or processes management.
Generate Prn file & print: simultaneously saves the prn file to disk and
prints the job on the plotter. Could be useful in cases where it is necessary
to send the same image for printing many times and you don’t want to have
to re-process every time. The processing time is more or less the same as
for printing, but in addition the file is ready to be sent again to the plotter or
transferred to another machine for printing as a demonstration.
Calculate print and then send to printer with this option enabled, the print
job is processed creating a temporary file and, only if the elaboration
procedure has been successful, is sent to the printer. The file generated is
eliminated after being sent, to save the file the option create PRN file must
also be enabled. (The interface changes when this option is selected).
Print now and eliminate job: is certainly the function which will be used
77