Download cimon plc function block system library user manual

CIMON PLC FUNCTION BLOCK SYSTEM LIBRARY USER MANUAL
Example) CM1_LOADCELL_M
You can get a digital value from Ch1 to Ch4 at slot #0 in 1st expansion base and save them to D2000,
D2001, D2002, and D2003 in sequence. When it works, M500 will be turned ON.
1.3.1.10. LOADCELL_S
It has only one detected weight value from Loadcell module. It is used to get only one detected
weight value if the FB name is finished with “_S”.
Variable Name
BASE
I/O
Input
Type
Word
SLOT
Input
Word
CH
Input
Word
OUTPUT
Output
Word
Device
Write Base number 0~16
Write Slot number
CM1 : 0 ~ 11
Write Channel number. (Ex. Ch2→ Write 2)
Write Word type device address that you want
to save the converted value
(Except :X / F / TS / TC / CS / CC / S)
WWW.CIMON.COM