Download cimon plc function block system library user manual

CIMON PLC FUNCTION BLOCK SYSTEM LIBRARY USER MANUAL
1.3.1.6. TC_S
It has only one digital value from TC module. It is used to get only one digital value if the FB name is
finished with “_S”.
Variable Name
BASE
I/O
Input
Type
Word
SLOT
Input
Word
CH
Input
Word
OUTPUT
Output
Word
Device
Write Base number 0~16
Write Slot number
CM1 : 0 ~ 11 / CM2 : 1 ~ 4 / CM3 : 1 ~ 11
Write Channel number. (Ex. Ch2→ Write 2)
Write Word type device address that you want
to save the converted value
(Except :X / F / TS / TC / CS / CC / S)
• System Library type
CM1_TC_S / CM2_TC_S / CM3_TC_S
• Buffer Memory Index
CM1 TC : 21 ~ 28 (Ch.1~8 : Digital conversion value)
CM2 TC : 21 ~ 28 (Ch.1~8 : Digital conversion value)
CM3 TC : 21 ~ 24 (Ch.1~4 : Digital conversion value)
WWW.CIMON.COM