Download User Manual - TR Electronic

Barcode tape
i
Notice!
When working with the barcode tap in cold warehouses, it should be ensured that the barcode tap be affixed before the warehouse is cooled. However, if it should be necessary to
work with the barcode tap at temperatures outside of the specified processing temperature,
please make certain that the bonding surface as well as the barcode tap are at the processing temperature.
i
Notice!
When working with barcode tape in curves, the barcode tape should only be partially cut at
the cut mark and affixed along the curve like a fan; it must also be ensured that the barcode
tape is affixed without tension (see Figure 5-4).
Figure 5-4: Partial cutting of the barcode tape in curves
© TR-Electronic GmbH 2002, All Rights Reserved
Printed in the Federal Republic of Germany
02/16/2011
TR - E - BA - GB - 0025 - 07
Page 21 of 67