Download DT-100

9.6 LCD Display
Run/Stop
9.7
9.8
Select/Set
Mode/Dispatch/Display
9.9
9.10
Function/F0/Light Control
9.11 Function 1-8 Keys
&
Left & Right Throttle Direction Change Arrows
9.12
9.13 Up/Add & Down/Delete Arrows
10.0 DT100IR: MAJOR SYSTEM MODES
10.1 Track Power On Mode
10.2 Track Power Off Mode
10.3 Stop Mode
10.4 Programming Mode
10.5 DT100IR Unit Reset
11.0 LOCO MODE: RUNNING TRAINS
11.1 The Select Message
11.2 Two digit address & % Speed Display
11.3 Locomotive Speed Control
11.4 Locomotive Direction Control
11.5 Selecting the Locomotives You Want To Run
11.5.1 Selecting A 2 digit address
11.5.2 Selecting An Aliased Address From the Alias Roster
11.5.3 Editing Aliased Address Roster Entries
11.5.4 Selecting A 4 Digit Address Loco
12.0 WALKAROUND OPERATION ON LOCONET
12.1 Forcing A Selection, or "Stealing" A "Lost" Locomotive
Diagram 5: Address Selection Flow Chart
12.2 DT100IR Slot Following -"Training Mode"
12.3 DCS100 Loco Purging Strategy or Time Out!
13.0 CONTROLLING LIGHTS & FUNCTIONS
13.1 Controlling Functions On Consisted Locos
14.0 DISPATCHING LOCOMOTIVES
15.0 DECODER STATUS
15.1 Status Editing a Decoder
15.2 Notes For Users of Non-Digitrax Decoders
16.0
SWITCH MODE
17.0 ROUTES
17.1 DT100IR Route Editing
With Route, Signal & Clock Edit Modes
17.2 Triggering A Route From Your DT100IR Keypad
18.0 MULTIPLE UNIT OPERATIONS:
18.1 MU-Link: Adding a Locomotive To A Consist
2
37
37
38
38
38
39
39
39
39
39
40
40
40
40
40
42
42
42
43
43
44
46
48
50
51
52
54
55
55
56
57
57
59
60
61
61
62
64
68
69
70
71